NF E64-604-2007 木工机械的安全性.平面刨床和厚度刨床
作者:标准资料网 时间:2024-05-12 05:20:57 浏览:8436
来源:标准资料网
【英文标准名称】:Safetyofwoodworkingmachines-Surfaceplaningandthicknessingmachines.
【原文标准名称】:木工机械的安全性.平面刨床和厚度刨床
【标准号】:NFE64-604-2007
【标准状态】:作废
【国别】:法国
【发布日期】:2007-09-01
【实施或试行日期】:2007-09-01
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:控制;定义;设计;设备安全;人类工效学;危害;刀轴;机器保护装置;机床;切削机床;维修;机械工程;操作说明书;龙门刨床;事故预防;保护设备;保护措施;安全;安全装置;安全工程;安全措施;安全要求;规范(验收);平面刨床;术语;测试;厚度刨床;木材;木材加工;木工机械;工作场所安全
【英文主题词】:Access;Anatomicalconfigurations;Anatomy;Batching;Blowback;Brakes;Brakingsystems;Bridges;Chips;Commissioning;Contact;Control;Controlpanels;Controlsystems;Cutoff;Cutting;Dangerousstuffs;Definitions;Design;Developments;Drawing-in;Dressing;Dust;Edge;Electricity;Emergencyshutdown;Emergency-off;Emission;Energy;Energysupplysystems(buildings);Environmentaleffects;Equipmentsafety;Ergonomics;Explosionhazard;Feathers;Firehazards;Fixings;Fracture;Friction;Gases;Guidebooks;Guidemechanisms;Handling;Hangingofnetting;Hazards;Height;Holdings;Hydraulics;Impact;Information;Inhalation;Interferences;Joiningprocesses;Knifeshafts;Knives;Layout;Machineguards;Machinetools;Machinesworkingbystockremoval;Machining;Maintenance;Malfunction;Marking;Materials;Measurement;Mechanicalcomponents;Mechanicalcrimping;Mechanicalengineering;Methods;Noise(environmental);Operatingelements;Operatinginstructions;Operatingmode;Operation;Planingmachines;Pneumatics;Powerlevels;Protectionagainstaccidents;Protectiondevices;Protectiveclothing;Protectivemeasures;Runningtime;Safety;Safetydevices;Safetyengineering;Safetymeasures;Safetyofmachinery;Safetyrequirements;Setup;Shafts;Shearing;Signals;Sound;Specification(approval);Stability;Startingdevices;Steps;Strain;Stress;Surfaceplaningmachine;Symbols;Tables;Templates;Terms;Testing;Thicknessingmachines;Tip;Training;Userinformation;Ventilation;Warningdevices;Wood;Woodworking;Woodworkingmachines;Workplacesafety
【摘要】:
【中国标准分类号】:J65
【国际标准分类号】:79_120_10
【页数】:55P.;A4
【正文语种】:其他
Product Code:SAE MA4872
Title:Paint Stripping of Commercial Aircraft - Evaluation of Materials and Process
Issuing Committee:Ams J Aircraft Maintenance Chemicals And Materials Committee
Scope: This document details the technical requirements to be used in the evaluation of materials and processes developed for use in stripping organic finishes from fixed wing commercial aircraft.The requirements herein are intended to ensure that the materials and processes used are not detrimental to the commercial aircraft when used as specified. These requirements are not intended to judge performance of the stripping method.These requirements are intended to cover the use of both single and duplex processes involving mechanical, chemical, or thermal means, which include the following: 1) high pressure water blasting (with/without use of chemical paint softeners); 2) dry media blasting (e.g., wheat starch, plastic media blast (PMB), etc.); 3) wet media blasting (e.g., sodium bicarbonate); 4) ice-pellet blasting (e.g., CO2 or water, with/without use of chemical paint softeners); 5) chemical paint stripping (e.g., with/without a dedicated or strippable layer in the paint system); 6) thermal paint stripping (e.g., with/without the use of ice pellet stripping); and 7) other processes, may require different or additional requirements as determined necessary by the user and OEM.The requirements are based on the materials and finishes present on the aircraft at the time of delivery. If the materials, finishes or the processing are changed subsequent to delivery, the individual user may require that additional or different tests be included in any evaluation.The means of compliance with the requirements of this document will have to be negotiated between the user and the relevant regulatory authorities.The test methods defined in this document constitute a recommended means of compliance.The final responsibility for safety, health, environmental consequences, the selection of a process for stripping and the number of stripping cycles rests with the user.It is the responsibility of the user to verify that all testing has been accomplished to the requirements of this specification. This includes verification of laboratory capabilities.A formal instruction and training program for material and equipment operators, to include operator certification, shall be established and maintained by the user.These requirements are not intended to cover repair materials. The individual user shall incorporate process control procedures and inspection to ensure damage to repair materials has not occurred. Repair material guidelines are located in Annex K.Evaluation of strip processes may be performed on metallic and/or composite substrates for use on representative structure as defined by the user. Process limitations shall be well documented by the end user.
Rationale: This document details the technical requirements to be used in the evaluation of materials and processes developed for use in stripping organic finishes from fixed wing commercial aircraft.The requirements herein are intended to ensure that the materials and processes used are not detrimental to the commercial aircraft when used as specified. These requirements are not intended to judge performance of the stripping method.These requirements are intended to cover the use of both single and duplex processes involving mechanical, chemical, or thermal means, which include the following: 1) high pressure water blasting (with/without use of chemical paint softeners); 2) dry media blasting (e.g., wheat starch, plastic media blast (PMB), etc.); 3) wet media blasting (e.g., sodium bicarbonate); 4) ice-pellet blasting (e.g., CO2 or water, with/without use of chemical paint softeners); 5) chemical paint stripping (e.g., with/without a dedicated or strippable layer in the paint system); 6) thermal paint stripping (e.g., with/without the use of ice pellet stripping); and 7) other processes, may require different or additional requirements as determined necessary by the user and OEM.The requirements are based on the materials and finishes present on the aircraft at the time of delivery. If the materials, finishes or the processing are changed subsequent to delivery, the individual user may require that additional or different tests be included in any evaluation.The means of compliance with the requirements of this document will have to be negotiated between the user and the relevant regulatory authorities.The test methods defined in this document constitute a recommended means of compliance.The final responsibility for safety, health, environmental consequences, the selection of a process for stripping and the number of stripping cycles rests with the user.It is the responsibility of the user to verify that all testing has been accomplished to the requirements of this specification. This includes verification of laboratory capabilities.A formal instruction and training program for material and equipment operators, to include operator certification, shall be established and maintained by the user.These requirements are not intended to cover repair materials. The individual user shall incorporate process control procedures and inspection to ensure damage to repair materials has not occurred. Repair material guidelines are located in Annex K.Evaluation of strip processes may be performed on metallic and/or composite substrates for use on representative structure as defined by the user. Process limitations shall be well documented by the end user.【英文标准名称】:Waterquality.Biologicalmethods.Determinationoftheacutelethaltoxicityofsubstancestoafreshwaterfish`BrachydaniorerioHamilton-Buchanan(Teleostei,Cyprinidae)!:flow-throughmethod
【原文标准名称】:水质.第5部分:生物法.第4节:淡水鱼[BrachydaniorerioHamilton-Buchanan(真骨下纲,鲤科)]急性致死毒性物质的测定:流通法
【标准号】:BS6068Pt.5Sec.5.4-1985
【标准状态】:作废
【国别】:英国
【发布日期】:1985-12-31
【实施或试行日期】:
【发布单位】:英国标准学会(BSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:有毒物质;鱼纲;图解法;水质试验;淡水;流动;毒理学;内插;毒性;硬骨鱼亚纲;蓑鱿;养鱼业;家畜繁殖;生物分析和试验;质量;水;试验设备;试验条件;试验持续时间
【英文主题词】:
【摘要】:
【中国标准分类号】:Z16
【国际标准分类号】:13_060_01
【页数】:14P;A4
【正文语种】:英语
